Checkweighing and inspection system manufacturers & suppliers

Rejector Systems
Rejector system

The chain checkweigher of Syndar checkweigher manufacturers aims to realize fast and accurate checkweighing and distribution process. Based on years of experience, checkweigher design and manufacture a variety of rejection system solutions to meet customer needs.

Filtering method:

1. The combination of checkweigher machine (checkweigher) and multiple rejection systems can eliminate overweight or underweight products, and quickly and accurately remove substandard products

2. The combination of metal detection and multiple rejection systems can eliminate overweight or underweight products, and quickly and accurately remove unqualified products

3. The combination of X-ray instrument and multiple rejection systems can eliminate overweight or underweight products, quickly and accurately remove substandard products

As a manufacturer, the challenges you face, you can get benefits here.

Push rod type
Push down NG products from the side, the production line is suitable for hard packaging and box packaging products (plastic film packaging needs to be equipped with a rejection brush), and can be combined as a case checkweigher
Swing arm type
The lever type is the baffle method. NG products are pushed open by the baffle door (arm), which is suitable for packaging products that are not too tall or too thin, and can form a checkweigher food industry.
Air blowing type
NG products are blown to the side of the production line through strong air, suitable for light packaging products below 500g, and can form a Snack checkweigher.
Drop type
The NG products are dropped from the conveyor belt, which is suitable for thin bag products or sheet products.
Upward and inward type
The conveyor belt is turned over to reject NG products, which is suitable for thin bag products, such as the detection of bakery checkweigher
Belt movement type
In the conveyor belt, the belt is used to move left and right to remove NG products, which is suitable for large-package products, such as case checkweigher.
Turning type
A revolving door is set on the side of the conveyor belt to reject NG products. It is suitable for rejecting products in large packages and thick bags at high speed.
Horizontal rejection type
The NG products are horizontally rejected on the conveyor belt so that the products will not be impacted due to the rejection. Since the rejection process will not cause any damage, it is suitable for fragile products, such as a fruit checkweigher.
Type of slide
When the chute is reversed, NG products will slide down, which is suitable for rejecting relatively light bulk products, such as a Vegetable Checkweigher.
Transmission type
Qualified products will be handed over on the conveyor belt, NG products will fall at the handover position, suitable for animal products and viscous bulk products, suitable for washdown checkweigher combination equipment, such as forming a meat checkweigher machine.

Syndar has been focusing on innovations in food packaging, weighing, and quality inspection and control. Experienced and aggressive employees

News